Explosion-proof human body static eliminator ball is a kind of human body static discharge product suitable for flammable, explosive and anti-static places. With the rapid development of the industrial economy, the elimination of static electricity is becoming more and more important, and it is also an important link that we cannot ignore. Explosion-proof human body static elimination ball It adopts a passive circuit, which uses the static electricity on the human body to make the circuit work, and finally achieves the function of eliminating static electricity.

It is characterized by:

1. small size and light weight.

2. no power is needed.

3. Easy installation.

4. reasonable and effective control of human electrostatic release.

5. Increase your workplace safety.

Installation procedure:

Step 1: Use a impact drill to make the corresponding installation holes at the bottom;

Step 2: Fix the corresponding hole of the flange plate with the expansion bolt and tighten it until it is firm;

Step 3: Connect the pole to the grounding equipment such as the grounding grid (pile) with a grounding cable.

If the installation site does not have a grounding grid or grounding pile, you can also insert a metal rod about 30CM deep into the ground, and then connect the grounding wire to the metal rod. 

When in use, remove the gloves and touch the ball for more than 1 second to safely and effectively remove static electricity from the human body.

Note: Please make sure that the product and grounding are reliable, and check regularly.

Application:

1. Pump rooms and places where the body's static electricity needs to be eliminated during the storage and turnover of oil products.

2. Places near gas station unloading ports, self-service gas stations, automatic gas dispensers, etc.

3. Entrance of oil depot, warehouse, factory building, electronic workshop, etc.

4. Petroleum, chemical industry, natural gas, laboratories, electronics industry, fireworks, aviation, military industry, textiles and other places where human body static electricity needs to be eliminated.